Every Line on the Facade Has a Name: A Guide to Exterior House Trim
Casings, sills, bands, columns and cornices: a ground-to-roof guide to the types of exterior trim and where each goes.
Exterior trim is the family of shaped pieces that frame the windows, doors, corners, floor lines and roof edge of a building. Walk around any house you admire and almost every line that catches the light has a name: casing, sill, surround, band, quoin, cornice. Learn the names and you can read a facade, and plan one.
Read more
This guide walks around a house from the ground to the roof: the different types of exterior trim, where each goes, what it is made from, and how the same pieces work on homes, multi-family buildings, storefronts and hotels. Along the way, it shows where Mouldex cement-coated foam mouldings fit.
Short answer: Exterior trim covers the edges, joints and openings of a building's exterior and gives it shadow lines and style. The main types of exterior house trim are window casings and heads, window sills, door surrounds and pilasters, band moulding (belly bands and frieze boards), corner trim and quoins, column wraps with capitals and bases, and exterior crown and cornice at the roofline, plus trim made for stucco and EIFS walls. Fascia, soffit and rake boards finish the roof edge itself. Common materials include wood, engineered wood, PVC, fiber cement, polyurethane and cement-coated foam.
What Is Exterior Trim?
Exterior trim is any material installed around the openings, edges and transitions of a home's exterior. It has two jobs. The first is protection: trim covers the raw edges where siding, stucco, brick or stone stops at a window, a door or a corner, helps shed water away from joints, and closes gaps that would otherwise let moisture and the elements into the wall. The second is appearance: trim adds depth, shadow and proportion, and gives the facade a polished, finished look, which is most of what people mean by curb appeal.
Trim is also how a building announces its architectural style from the street. Wide, flat casings with a heavy head read as Craftsman. A moulded crown over each window and a pedimented front door read as Colonial or Georgian. Slim, square-edged casings and a crisp band read as modern.
Trim boards vs. architectural trim
On a sided house, much of the trim is flat trim boards: corner boards, frieze boards under the eaves, batten strips, rake boards on the gable and fascia along the roof edge. Architectural trim is shaped and three-dimensional: casings with a stepped profile, sills that slope and project, cornices that step out from the wall. Most homes use both, and many homeowners only notice the difference when a board rots or a sill cracks.
Window Trim: Casings, Heads and Sills
Windows are where exterior trim does the most work, because they are where water most wants to get in. A fully trimmed window has a casing, a head and a sill.
Window casing
The casing is the frame around the window opening, the exterior cousin of interior casing. It covers the joint between the window frame and the wall and sets the window's visual weight. Flat casings suit Craftsman and farmhouse homes, stepped and moulded casings suit Colonial, Victorian and other traditional styles, and narrow square profiles suit modern facades. Mouldex exterior window trim comes in Colonial, Craftsman, Victorian and modern profiles, sold by the piece and cut and mitered on site, so every window can be trimmed to its exact size rather than forced into a kit.
Window heads and crowns
The head is the trim across the top of the window. It can simply continue the casing, or it can be a deeper header with a small crown on top, which casts a shadow line and throws water clear of the window. Arched windows get curved heads; curved sections are available on request. Keystones are specialty orders.

Window sills
The sill sits at the bottom of the window, sloped to shed water away from the frame and projecting past the wall so water drips clear of the surface below. It is the hardest-working piece of trim on the house, and it gives a window a base. Our exterior window sills are moisture-inert and won't rot or warp, and they pair with any casing profile.
Door Trim: Surrounds, Pilasters and Pediments
The front door is the focal point of most facades. Door trim ranges from a casing that matches the windows to a full surround with pilasters, a head and a pediment.
Door casings and surrounds
A door casing frames the doorway the same way a window casing frames a window. A surround goes further, building up a deeper frame that can include a header, a crown and side pieces. Mouldex exterior door trim profiles also work as window trim, so doors and windows can match, and they can be paired with pilasters and cornice mouldings for a full entry surround. Garage doors, side doors and storefront entrances use the same pieces at a larger scale.
Pediments and crossheads
A pediment is the triangular or curved cap above a door; a crosshead is a flat, moulded head that projects over it. Both add height and formality. Door pediments and crossheads are available as custom orders.
Pilasters
A pilaster is a flat, shallow column applied to the wall, with a base, a shaft and a capital. Pilasters frame entrances, garage doors and building corners with the proportions of a classical column, without the depth of a freestanding one. Our exterior pilasters come with flat or fluted shafts and matching bases and capitals, and any pilaster base can be paired with any capital.
Band Molding, Frieze Boards and Belly Bands
A band moulding runs horizontally across the facade. Between floors it is called a belly band or belt course; just under the eaves, it is a frieze board. A band separates floor levels, makes a clean break between finishes such as brick below and stucco above, and divides a tall elevation into better proportions. On mixed-use buildings, a band at the second floor often marks the change from a retail base to the residential floors above.
Mouldex exterior band molding has a lightweight, moisture-inert foam core with a hard cementitious coating, in standard profiles or a custom profile, for stucco, EIFS, brick and stone veneer facades. Because the material has near-zero joint expansion, long runs keep tight joints across the facade.
Corner trim and quoins
On sided houses, corner boards cover the outside corners where two runs of siding meet, protecting the board edges and giving each wall a vertical frame. On masonry and stucco buildings, quoins do the same job with more weight: alternating blocks stacked up the corner, a feature of Georgian, French and Italianate homes and of many civic and commercial buildings. Mouldex makes quoins as custom orders, cut and coated to your block sizes, and a pilaster is another way to finish a corner.
Column Wraps, Capitals and Bases
Columns are often the largest pieces of trim on a house. On most modern buildings, the column you see is a wrap: a wood post, steel column or pole carries the porch roof, and the wrap gives it a classical shape.
Mouldex exterior column wraps are decorative, non-load-bearing shells, round or square, that surround an existing structural post; the post carries the load. They pair with matching capitals at the top and bases at the bottom, which is where a column gets its character, from a plain square cap to a more detailed capital. Wraps are a common way to replace rotted wood porch columns, because the cement-coated surface won't rot or warp where wood columns tend to fail first, at the base.

Exterior Crown and Cornice at the Roofline
At the top of the wall, a cornice steps out to cap the facade and throw a deep shadow. Exterior crown molding is a smaller relative, used under eaves, over windows and doors, and along the top of a parapet. On flat-roofed commercial buildings, a cornice is what makes the top of the building look finished instead of cut off.
The roof edge has its own trim: fascia boards face the rafter ends and carry the gutters, soffits close the underside of the eaves (vented soffits help ventilate the attic), and rake boards follow the gable. These are usually wood, aluminum, PVC or fiber cement, installed by the roofing or siding contractor. Mouldex exterior cornice moldings sit on the wall below the eaves or along a parapet, giving the roofline a projecting, shadowed profile that flat boards can't.

Exterior Trim for Stucco and EIFS
On stucco and EIFS walls, trim is applied to the wall surface and finished with it. Without trim, a stucco house can look flat; with surrounds, bands, sills and a cornice, it gains depth and shadow. That is the job of stucco foam trim: cement-coated EPS foam shapes that take the same finishes as the wall.
Mouldex exterior mouldings have an EPS foam core with a cement-based coating about 3/16 in thick, reinforced with fiberglass mesh, so they sit naturally on stucco, EIFS, brick and manufactured stone veneer. Adhesive is usually enough to install them; mechanical fasteners depend on the weight of the piece. Our stucco molding and stucco foam trim hub gathers the profiles used on stucco and EIFS facades and explains how trim attaches to each.

Types of Exterior Trim at a Glance
Use this table to name each piece, find where it goes, and see which Mouldex collection covers it.
| Trim type | What it is | Where it goes | Mouldex collection |
|---|---|---|---|
| Window casing | The frame around a window opening, flat or moulded | Sides and top of each window | Exterior Window Trim |
| Window head | A deeper header, often capped with a small crown | Above the window casing | Exterior Window Trim (curved sections on request) |
| Window sill | A sloped, projecting ledge that sheds water | Bottom of each window | Exterior Window Sills |
| Door surround | A casing or built-up frame around a doorway | Front, side, garage and storefront doors | Exterior Door Trim |
| Pilaster | A flat column with base, shaft and capital, applied to the wall | Beside doors, garage doors and at corners | Exterior Pilasters |
| Band molding | A horizontal band, also called a belly band, belt course or frieze board | Floor lines, material changes, under the eaves | Exterior Band Molding |
| Corner trim and quoins | Boards or stacked blocks that finish outside corners | Building corners | Custom quoins; Exterior Pilasters for corners |
| Column wrap | A decorative, non-load-bearing shell around a structural post | Porches, porticos, covered entries | Exterior Column Wraps, with capitals and bases |
| Crown and cornice | A projecting moulding that caps the wall | Top of the wall, under eaves, parapets | Exterior Cornice Moldings |
| Fascia, soffit, rake | Flat boards and panels that finish the roof edge | Rafter ends, underside of eaves, gable edges | Not a Mouldex product (roofing or siding trade) |
| Stucco and EIFS trim | Cement-coated foam shapes applied to the wall surface | Windows, bands and cornices on stucco and EIFS | Stucco Molding hub |
Exterior Trim Materials: Wood Trim, PVC Trim, Fiber Cement and Composite Options
The material decides how trim weathers, how it is installed and how much regular maintenance it needs. Here is how wood and other trim options compare for exterior applications.
Solid wood and engineered wood
Solid wood trim (real wood such as cedar or pine) is the traditional choice: easy to cut, shape and repair, and right for historic work. Its weakness is moisture. Unpainted end grain, failed caulk and splashback at the bottom of a board let water in, and wood trim can then rot, swell and attract insects. Engineered wood (wood fibres bound with resins) offers better stability and more uniform boards than solid wood, but its cut edges and ends still need sealing and paint.
PVC trim and polyurethane
PVC trim boards don't absorb water, which makes them popular around doors and at grade. PVC expands and contracts with temperature, so long runs need room to move, and dark paint colours can add to that movement. Polyurethane trim is molded high-density foam, good for detailed decorative pieces; like PVC, it is a plastic that is primed and painted.
Fiber cement and aluminum
Fiber cement trim boards are dense and durable, but they are heavy, need special blades and dust control when cut, and come mainly as flat boards rather than shaped profiles. Aluminum is mostly used to clad fascia and soffits, or to wrap existing wood trim.
Precast, GFRC and cement-coated foam
Precast concrete and GFRC give a true masonry look, but they are heavy, often need structural support or anchors, and take time to make and set. Cement-coated foam gives a similar shaped, stone-like surface with far less weight: Mouldex mouldings are CNC cut from an EPS foam core and coated with cement, so they are much lighter than precast and lighter than wood. Unlike wood, they are moisture-inert and won't rot or warp; they are less susceptible to cracking, have near-zero joint expansion, and are low maintenance. They are primed and painted after installation and repainted like any painted exterior trim. For a deeper side-by-side, see our guide to exterior moulding materials compared.
Exterior Trim on Homes and Commercial Buildings
The vocabulary is the same on a bungalow and a hotel; only the scale changes. Mouldex is the specified manufacturer for global luxury brands and North America's largest home builders. And The White House.
Custom homes and renovations
Casings and sills on every window, a pilastered front door, a belly band and a cornice under the eaves. In renovations, new trim quickly changes how a house reads from the street.
Builders and multi-family
Repeatable profiles let a builder create a distinct style for each elevation from one product family. On townhomes and apartments, bands and cornices break up long, tall walls.
Retail, hotels and restaurants
Storefronts, hotel entries and restaurant facades use surrounds, pilasters and deep cornices to signal quality from the street. Mouldex has supplied projects for clients such as Restoration Hardware (RH), Tiffany & Co. and Ritz-Carlton.
How to Choose Exterior Trim: Several Factors to Weigh
Choosing exterior trim is a set of informed decisions, made in roughly this order.
- Start with the architectural style. Let the style set the vocabulary, and keep windows, doors and bands in one family so the trim reads as a set.
- Match the trim to the wall. Siding uses trim boards plus shaped pieces; stucco, EIFS, brick and stone take applied trim that is finished with the wall.
- Size it for the street. Trim is seen from the sidewalk, so larger windows and taller walls call for wider casings, deeper sills and bigger cornices.
- Pick the material for climate and upkeep. Weigh moisture, freeze and thaw, sun, weight and long term durability against budget and the look you want.
- Plan installation and finish. Mouldex trim is sold by the piece, cut and mitered on site, installed with adhesive (fasteners depend on the weight of the piece), then primed and painted with exterior latex or a textured brush coat. Lead times are 7 to 10 days, depending on profile and quantity.
- See it in person. Photos can't show texture or scale, so order a free sample kit before you specify. CAD details and specifications are available to members of our Trade Program.
Exterior Trim FAQ
What is the trim on the outside of a house called?
It is called exterior trim, and each piece has its own name: casing around windows and doors, sills under windows, surrounds and pilasters at doors, band or belly band moulding between floors, corner boards or quoins at corners, column wraps on porches, and crown or cornice at the top of the wall. Fascia, soffit and rake boards finish the roof edge.
What are the different types of exterior house trim?
The main types are window casings and heads, window sills, door trim and surrounds, pilasters, band moulding and frieze boards, corner trim and quoins, column wraps with capitals and bases, exterior crown and cornice, fascia and soffit, and trim made for stucco and EIFS walls.
What is the best type of trim for outdoor use?
The best exterior trim is one that handles moisture, keeps its shape and suits the style of the building. Wood is traditional but needs regular maintenance, PVC suits flat boards near the ground, and fiber cement is durable but heavy. For shaped architectural trim, cement-coated foam is moisture-inert, won't rot or warp, and is much lighter than precast.
Can exterior trim keep water out on its own?
No. Trim sheds water and covers joints, but the wall behind it still needs proper flashing and a weather-resistive barrier. Choose a trim material that is not damaged by moisture, such as moisture-inert cement-coated foam, and keep joints sealed and paint in good repair.
Is exterior trim satin or semi-gloss?
Satin and semi-gloss are both common for exterior trim. Semi-gloss is easier to wipe clean and makes the trim stand out against the wall; satin hides surface imperfections better and gives a softer look. Use an exterior latex paint over a primer; on Mouldex trim, a textured brush coat is another option.
How much does it cost to replace exterior trim on a house?
Cost depends on how many windows and doors you are trimming, the size and detail of the profiles, the material, access and local labour rates, so get a quote for your project. Lightweight trim that is cut on site and installed with adhesive saves labour, materials and time compared with heavier materials that need structural support.
Ready? We are.
Request a quote. Order a free sample kit. Or call/live chat with us about your project.
+1 (905) 660-6338 1 (888) MOULDEX
Live chat with Davide on the bottom right.